316Ti 1.4571 Stainless Steel fastener bolts and nuts washer M6-M100
1. Stainless Steel 316Ti Fasteners Specification
Specification : ASTM / ASME - A/ SA 193 / 193
Standards :DIN, ASTM, BS and all International Standards.
Size : M3 – M56 (3/6″ to 2″) and other custom sizes
Nuts Size : M3 - M56 | 3/6" to 2" | Custom Sizes
Bolt / Screw Size : M3 - M56 | 3/6" to 2" | Custom Sizes
Machine Screws Size : M1.6 - M12
Washers Size : M3 - M56 | 3/6" to 2" | Custom Sizes
Length : 3 mm to 200 mm
Type : Square Nut, Socket Screw, Screw, Pan Head Screw, Hex Domed Cap Nuts, Studs, Hex Set Screw, Hex Nut, Socket Hexagon Head Screw Anchor Bolt, J Bolts, Foundation Bolts, Sockets, Allen Cap screw, Stud Bolts, Wing Screw, Marine Anchors, Bolts, Machine Screw, Screws, Anchors, Structural Bolts, T-Head Bolts, Hex Head Bolts, Studs, Eye Bolt, Washers, Socket Head Cap Screw, U- Bolts, Hexagon Nut, Nut, Nuts, Mushroom Head Square Neck Bolts, Spring Washers, Cap Screw, Hex Coupling Nut, Wing Screw
2. Equivalent Grades, Chemical Composition and Mechanical properties
Stainless Steel 316Ti Fasteners Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316Ti | 1.4571 | S31635 | SUS 316Ti | 320S31 | 08Ch17N13M2T | Z6CNDT17‐123 | X6CrNiMoTi17-12-2 |
SS 316Ti Fasteners Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 316Ti | 0.08 max | 2.0 max | 0.75 max | 0.045 max | 0.030 max | 16.00 - 18.00 | 2.00 - 3.00 | 10.00 - 14.00 | 68.395 min |
Stainless Steel 316Ti Fasteners Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1399 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
3. Available Types of Fasteners
Bolts
.Stainless Steel 316Ti Hex Bolt
.Stainless Steel 316Ti Heavy Hex Bolts
.ASTM A193 SS 316Ti Flanges Bolt
.ASME SA193 SS 316Ti Hanger Bolts
.UNS S31635 Tap Bolt
.Steel UNS S31635 Machine Bolts
.DIN 1.4571 Plow Bolt
.WERKSTOFF NR.1.4571 Elevator Bolts
Washer
.Stainless Steel 316Ti Spring Washer
.Stainless Steel 316Ti Lock Washers
.ASTM A182 SS 316Ti Spherical Washer
.ASME SA182 SS 316Ti Flat Washers
.UNS S31635 Round Washer
.SS UNS S31635 Machined Washers
.DIN 1.4571 Square Washer
.WERKSTOFF NR.1.4571 Punched Washers
Nuts
.Stainless Steel 316Ti Hex Nuts
.Stainless Steel 316Ti Heavy Hex Nut
.ASTM A182 SS 316Ti Lock Nuts
.ASME SA182 SS 316Ti Self Locking Nut
.Stainless Steel UNS S31635 Nylon Insert Nuts
.UNS S31635 Coupler Nut
.DIN 1.4571 Hexagon Nuts
.WERKSTOFF NR.1.4571 Coupling Nut
4. TESTINGS (DESTRUCTIVE, NON DESTRUCTIVE):
.Positive Material Identification - PMI Testing
.Chemical Analysis - Spectro Analysis
.Mechanical Testing Such as Tensile, Elongation
.Micro Test
.Macro Test
.Hardness Test
.Pitting Resistance Test
.Intergranular Corrosion (IGC) Test
.Flaring Test
.Flattening Test
.Hydrostatic Test
.Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
.Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
.Radiography Test
.Dye Penetrant Test (DP Test)
.Ultra Sonic Test (UT)
.Eddy Current Testing
.Impact Test
.Bend Test
5. PACKING:
We understand the importance of packaging specially in case of international shipments as the consignment has to go through a number of channels to reach the final destination, thus we take proper care of packing.
We pack our goods in a various ways depending on the products. The different ways in which our products are packed are:
Shrink-wrapped
Wooden Boxes
Wooden Pallets
Wooden Crates
Carton boxes
INSPECTION:
We welcome stage wise inspection, final stage inspection from any of your representative or third party inspection agencies.
We regularly have inspections ongoing at our premises from internationally acclaimed Inspection Agencies such as TUV, Llyods, BVIS, SGS, DNV etc.
Product Tags:
|
|
316Ti 1.4571 Duplex Stainless Steel Fasteners Bolts And Nuts Washer M6 - M100 Images
|
