Brand Name : HT
Model Number : spring steel GB/T 1222 65MN spring washer hardness: 240~270HB
Certification : ISO9001
Place of Origin : China
MOQ : 1 set
Payment Terms : L/C,T/T, Western Union
Supply Ability : 1000 set per month
Delivery Time : 30-35 work days
Packaging Details : wooden case, wooden pallet
Product Type : Bolt, Nut, Washer, Stud bolt, U bolt
Name : spring steel GB/T 1222 65MN spring washer hardness: 240~270HB
Size : M6-M100
Finish : Cold galvanizing, Zinc-Nickel, Black, Cadium plated
Producing standard : DIN, ASME
Material : Nickel alloy/stainless steel/duplex stainless
spring steel GB/T 1222 65MN spring washer hardness: 240~270HB
1. Brief Introduction
65Mn steel is a Chinese GB standard spring steel grade. Its strength, hardness, elasticity and hardenability are higher than that of 65# steel, but it has superheat sensitivity, easy to produce quench crack and temper brittleness. The annealed state has good machinability, and the cold deformation plasticity is low, but the weldability is poor.
65Mn high carbon steel is mainly used in the manufacture of various small-section flat springs, round springs, clockwork, etc. It can also be used to manufacture spring rings, valve springs, shock absorbers, clutch reeds and brake springs.
65Mn Datasheet
Chemical Composition % | ||||||||
Grade | C | Si | Mn | P (≤) | S (≤) | Cr (≤) | Ni (≤) | Cu (≤) |
65Mn | 0.62-0.70 | 0.17-0.37 | 0.90-1.20 | 0.030 | 0.030 | 0.25 | 0.35 | 0.25 |
Mechanical Properties | ||||||
Grade | Tensile Strength | Yield Strength ≥ | Elongation ≥ | Reduction in Area ≥ | Brinell Hardness ≤ | Density |
65Mn | 980 | 785 | 8.0 | 30 | 302 HBW | 7.85 g/cm3 |
2. 65Mn Spring Steel Equivalent
65Mn steel is considered to be equivalent to AISI/SAE 1065, and some people also compare 65Mn with AISI/SAE 1075, 1095, 5160; JIS SK5 (SK85) and Chinese 8Cr13Mov, so the table below lists the difference of chemical composition for your reference.
65Mn vs 1065, 1075, 1095, 5160, SK5 and 8Cr13Mov in chemical composition
Chemical Composition % | ||||||||||
Grade | C | Si | Mn | P (≤) | S (≤) | Cr | Ni (≤) | Cu (≤) | Mo | V |
65Mn | 0.62-0.70 | 0.17-0.37 | 0.90-1.20 | 0.030 | 0.030 | ≤ 0.25 | 0.35 | 0.25 | – | – |
1065 | 0.60-0.70 | 0.60-0.90 | 0.040 | 0.050 | – | – | (0.20) | – | – | |
1075 | 0.70-0.80 | 0.40-0.70 | 0.040 | 0.050 | – | – | (0.20) | – | – | |
1095 | 0.90-1.03 | 0.30-0.50 | 0.040 | 0.050 | – | – | (0.20) | – | – | |
5160 | 0.56-0.61 | 0.15-0.35 | 0.75-1.00 | 0.035 | 0.040 | 0.70-0.90 | – | (0.30) | – | – |
SK5 | 0.80-0.90 | 0.10-0.35 | 0.10-0.50 | 0.030 | 0.030 | 0.30 | 0.25 | 0.25 | – | – |
8Cr13Mov | 0.70-0.80 | 1.00 | 1.00 | 0.040 | 0.030 | 13.00-14.50 | 0.60 | 0.10-0.30 | 0.10-0.25 |
3. 65MN spring washer common test
4. 65MN spring washer photo:
M6 - M100 Duplex Steel Fasteners GB/T 1222 65MN Spring Washer Hardness 240 - 270HB Images |